Fits: 2010-up Beta, all models, (RR, RS and Xtrainer), both 2 & 4 strokes except the EVO

Replaces OEM link. Beta PN.020.33.030.00.00,

**Will not fit the Beta 125RR-S or any bike that does not have the linkage style suspension with the stock link/pull rod Beta PN: 020.33.030.00.00 . Will not fit the EVO.

See below for rear lowering amounts.

PART # CRF250L-2:

• Fits 2013-UP CRF 250L Dual Sport, lowers the rear 1.75 inches. WILL NOT FIT THE CRF 250L RALLY

• Replaces stock link assembly PN 52475-KZZ-900 

• Does NOT fit the CRF300L / L Rally

PART # CRF250L-2 RALLY:

• Fits 2017-UP CRF 250L Rally, lowers the rear 1.50 inches.

• Replaces stock link assembly PN: 52475-KZZ-J00 

See chart below for fitment and rear lowering amounts, you will have to select the part number that fits your bike.

Replaces stock link PN: 52475-MJP-G50

Fits: 2016 and newer CRF 1000 Africa Twin and 2020+ CRF1100

Lowers the rear 1”

See chart below for fitment/lowering amounts.

Husqvarna 701 Enduro Lowering Link. Links are $179 except for KTM8-Dakar, which is $230.

**These links replace the Husqvarna stock link assembly PN: 2700408304401 or casting number on the link: 270.04.08300

Select the desired REAR lowering amount below. Refer to the chart at the bottom for lowering amounts.

KTM8-2 link = 1 3/4"+ rear lowering **** Will not work on the Husky 701's or 2019-up KTM690's without extensive modifications!

*SOLD AS A SET

KLR650-1 & KLR650-2 FIT 1987 - 2007 KLR 650 (Replaces Kawasaki part # 46102-1227 (L) & 46102-1228 (R)

KLR658-1 & KLR658-2 FIT 2008 - UP KLR650 (Replaces Kawasaki part # 39111-0036 and 39111-0077 )

*Note: We only recommend the 2" lowering links for lighter non-aggressive riders as they allow the tire to rub when near bottoming.

Some KLR models from 2004 - 2007 may have a longer shank that do not allow the bolts to tighten to the bearing.  If that is the case, we recommend the addition of either a 14 mm split type lock washer or a 15 mm flat washer under the nut of both link mounting bolts. 

Select desired REAR lowering below.

See chart below for fitment and lowering amounts, you will have to select the part number that fits your bike.

Replaces OEM KTM Part # 7720 40830 4401, 7770 40830 4401, & 7900 40830 4401

690 Enduro SMC links are $179 except for the KTM-Dakar link which is $230. Rear lowering amounts shown on the chart below.

Fits: 2008-UP KTM 690 Enduro, Enduro "R", & SMC, SMC-R models.

*Will not fit the 690 SM Prestige/Duke/, or Rally Factory Replica.

Replaces KTM part # 7650408304401 & part #2700408304401

**Note: HL701-2 will require filing of rocker on the 2019+690 and 2016+ 701, see pictures below.